SMS Roughing Mill Emergency Repair Project

2023-03-21

Case Details: Assist customers in resolving 1 # Roll mill gear cracking issue; the customer’s original product is Imported components have long procurement cycles and high prices.

Our company assists customers in avoiding prolonged downtime. It resulted in substantial losses, prompting the proposal for joint development using domestically produced components. Gear shafts replace imported products, and all… Construction period control is within 2 Within the week.

Renovation Results: To resolve the customer’s urgent concerns In an emergency, our company, in a short period of time… 1 4 Completed within days. Gear machining operations, while ensuring the precision of the gear shaft. The quality is no lower than that of imported products, and the product is easy to install. After use, measurements show that all technical specifications fully comply. On-site requirements have significantly shortened the emergency repair time for customers.

Time has reduced order losses.

Overhaul Project for the Vacuum Plate Filter of Copper Emulsion

Technical Proposal for High-Pressure Phosphorus Removal Pump

Recommended Cases

Continuous Casting and Rolling Production Line Installation Project

A production line installation project for a client in Shangrao from 2019 to 2020, and a production line installation project for a client in Yingtan in 2023.

2026-10-09 16:48

Gearbox emergency repair and track installation

On a continuous casting and rolling production line in Changzhou, the customer’s reducer equipment was damaged, and the rail system sustained severe damage. Due to the equipment’s mechanical failure, it could not operate, disrupting normal production and significantly impacting the production schedule.

2026-10-09 16:46

Fine Rolling Emulsion Spraying Project

At the customer’s site, the emulsion spray performance was inadequate, resulting in insufficient roll cooling and an increased copper powder buildup in downstream processes. This led to frequent roll cracking and accelerated roll wear. Moreover, the emulsion failed to form a stable oil film, compromising the surface finish of the rolls. Production had to be halted mid‑run to replace the rolls, disrupting workflow and delaying output. Consequently, the customer engaged us to design and implement a customized precision‑rolling emulsion‑spraying solution.

2023-04-28 10:34

High-Conductivity Cleaning Line Installation and Commissioning Project

The customer’s acid‑free cleaning line suffers from severe corrosion; it is approximately 30 meters long and inclined at a certain angle to the horizontal. The centerlines of the 12 cleaning tanks must be aligned within 1 mm.

2023-03-21 17:41

Electrical Drive Roll Retrofit Project

At the customer’s site, the nip roller equipment exhibits significant vibration, suffers from an impractical design, and has a high failure rate, thereby impacting production efficiency.

2023-03-21 17:40

Overhaul Project for the Vacuum Plate Filter of Copper Emulsion

Due to prolonged service life, the customer’s vacuum plate filter for copper emulsion has developed severe leaks, and more than 60% of its support rails have fractured.

2023-03-21 17:40

A technology-driven enterprise specializing in the design, manufacture, processing, and sales of Morgan high‑carbon wire, Morgan copper wire rolling mills, and related equipment and spare parts.

Nanjing Yunzheng Industrial Equipment Co., Ltd.

Landline number:+86-025-57118625
Factory Address: Building C1-1, Zhongnan Zhiyu Industrial Park, No. 5 Xiaoqi Road, Xiongzhou Subdistrict, Liuhe District, Nanjing City, Jiangsu Province

Business license